2.4 Inch St7789V RGB TFT LCD Screen Display

Product Description

2.4 Inch St7789V RGB TFT LCD Screen Display

H24I4001 is a 2.4 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees (typical).Optional RTP or CTP.

This H24I4001 module has built-in ST7789V controller IC, supports RGB interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typical value), and the contrast ratio is 800:1. This module is a communication device, Industrial ideal for instrumentation, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C

DRAWING

General Specifications

Item	Contents	Unit
Size	2.4	inch
LCM Dimension	42.72(W)* 60.26(H) * 2.35(T)	mm
LCD Active Area	36.72* 48.96	mm
Number Of Dots	240×320	pixel
LCD Type	a-Si TFT
Viewing Direction	IPS
Driver IC	ST7789V
Interface Type	RGB
Operating Temperature	-20ºC~ 70ºC
Storage Temperature	-30ºC~ 80ºC
Backlight Type	4 LEDs
Brightness	380	Cd/m2

Interface

NO.	Symbol	Description
1	LEDK	BACKLIGHT CATHODE
2	LEDA	BACKLIGHT ANODE
3	GND	Ground
4	VCI	POWER SUPPLY
5	RESET	Reset pin
6	RS/SCL	Data/Command register address./Serial  Clock
7	RD	Read signal, rising-edge-active.
8	CS	Chip enable, Low-active.
9	SDA	Serial Data Input
10	WR/DC	Write signal, rising-edge-trigger./Destination register selection.
11	VS	Frame Synchronizing Signal
12	HS	Line Synchronizing Signal
13	DCLK	Dot Clock Signa
14	DE	Data Enable Signal
15	GND	Ground
16-33	DB17-DB0	Data Bus
34	TE	Frame mark.
35	GND	Ground
36	IOVCC	I/O   POWER SUPPLY
37	XR	Touch Panel Right
38	YD	Touch Panel Down
39	XL	Touch Panel Left
40	YU	Touch Panel Up

ABOUT US

SGS Certification

Experimental equipment

Q: How can I get some samples?

A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount. 

Q: What is the MOQ?

A: It depends on different products. Please keep in touch with sales to confirm the MOQ.

Q: How do you control quality?

A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2001 management system.

Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment.

Q: Does your product have any warranty?

A: Yes, we offer 12 months warranty for our products.

Q: What's your payment method?

A: Payment: T/T, Paypal, Western Union, etc.

For samples: payment in advance.

For mass production: 30% deposit and 70% balance before shipment.

Q: Do you offer custom solution?

A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.