| Customization: | Available |
|---|---|
| Usage: | Small-sized LCM |
| Digital LCD Module Type: | TFT LCD Display |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
H24I4001 is a 2.4 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees (typical).Optional RTP or CTP.
This H24I4001 module has built-in ST7789V controller IC, supports RGB interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typical value), and the contrast ratio is 800:1. This module is a communication device, Industrial ideal for instrumentation, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C
DRAWING| Item | Contents | Unit |
| Size | 2.4 | inch |
| LCM Dimension | 42.72(W)* 60.26(H) * 2.35(T) | mm |
| LCD Active Area | 36.72* 48.96 | mm |
| Number Of Dots | 240×320 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789V | |
| Interface Type | RGB | |
| Operating Temperature | -20ºC~ 70ºC | |
| Storage Temperature | -30ºC~ 80ºC | |
| Backlight Type | 4 LEDs | |
| Brightness | 380 | Cd/m2 |
| NO. | Symbol | Description |
| 1 | LEDK | BACKLIGHT CATHODE |
| 2 | LEDA | BACKLIGHT ANODE |
| 3 | GND | Ground |
| 4 | VCI | POWER SUPPLY |
| 5 | RESET | Reset pin |
| 6 | RS/SCL | Data/Command register address./Serial Clock |
| 7 | RD | Read signal, rising-edge-active. |
| 8 | CS | Chip enable, Low-active. |
| 9 | SDA | Serial Data Input |
| 10 | WR/DC | Write signal, rising-edge-trigger./Destination register selection. |
| 11 | VS | Frame Synchronizing Signal |
| 12 | HS | Line Synchronizing Signal |
| 13 | DCLK | Dot Clock Signa |
| 14 | DE | Data Enable Signal |
| 15 | GND | Ground |
| 16-33 | DB17-DB0 | Data Bus |
| 34 | TE | Frame mark. |
| 35 | GND | Ground |
| 36 | IOVCC | I/O POWER SUPPLY |
| 37 | XR | Touch Panel Right |
| 38 | YD | Touch Panel Down |
| 39 | XL | Touch Panel Left |
| 40 | YU | Touch Panel Up |
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2001 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment.
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
){kind=link}